KLH AUDIO - Model Three Bookshelf/Floorstanding Speaker (EACH) - Available in Various Colours
Model Three
Description
The newest addition to the Model Collection: the stunning KLH Model Three loudspeaker! This beauty is a compact bookshelf speaker that rivals the largest floor standing speakers. The Model Three’s two-way design continues the KLH acoustic suspension legacy of accurate, audiophile-quality performance. This charming bookshelf speaker serves as the perfect solution for music enthusiasts with smaller listening spaces. Unlike other loudspeakers at this price point, listeners have the flexibility to place their Model Three’s closer to the wall than the average tower speaker. Or with even more convenience, you can fit your Model Three on a bookshelf!
Features
- Iconic Mid-Century Modern Styling
- Acoustic Suspension Design – The most accurate and linear enclosure design available today
- Three-Position Acoustic Balance Control to tailor the loudspeaker’s output for the most difficult acoustic environments
- Non-Resonant Die-Cast Aluminum Woofer Frame
- Machined Aluminum 1” tweeter faceplate
- KLH cabinetry featuring a structurally reinforced 3⁄4” MDF Enclosure
- Thirteen Component network using high quality iron-core inductors & Mylar capacitors
- Each speaker includes its own 8 ̊ slant riser base made of powder coated 14-gauge steel
- Low-Profile Magnet Attached Grille
- 10-Year Warranty
Specifications
- Frequency Response: 46Hz – 20,000Hz +/- 3dB
- Low Frequency Extension: -10dB @ 35Hz
- In-Room Sensitivity: 88dB @2.83V / 1M
- Free-field Sensitivity: 85dB @ 2.83V / 1M
- Power Handling: 150 Watts / 600 Watts Peak
- Recommended Amplification: 30 Watts to 150 Watts
- In-Room Maximum SPL: 108dB
- Maximum Output @45Hz: 1 101dB
- Impedance: 6 Ohms (3.7 ohm minimum @320 Hz)
- Horizontal Dispersion: 140° Degrees
- Features: Three-Position Acoustic Balance Control
- Crossover Frequency: 1,600Hz
- High Frequency Driver: 1" Aluminum Dome with Soft Rubber Suspension
- Low Frequency Driver: 8" Pulp-Paper Cone with Reverse Roll Rubber Suspension, 1.5" Diameter Flat-Wire Voice Coil
- Enclosure Material: Structurally Reinforced ¾" Medium Density Fiberboard
- Inputs: Five-Way Gold-Plated Binding Posts
Dimensions
| Height: | 28.25" (71.8cm) w/ Included Riser Base 19.0" (48.2cm) w/o Riser Base |
| Width: | 12.25" (31.1cm) |
| Depth: | 11.5" (29.2cm) w/ Included Riser Base 10.5" (26.7cm) w/o Riser Base |
| Weight: | 29Ibs. (13.2kg) w/o Riser Base 36Ibs. (16.4kg) w/ Included Riser Base |
Included Accessories: 8° Slant Riser Base
Cleaning
Your speakers feature a genuine wood veneer. The finish is a low-gloss clear lacquer that only requires an occasional soft damp cloth. Clean with the grain, avoiding a circular or cross-grain motion. Do not use an abrasive cleaner. Avoid getting any part of the speaker components wet. Do not place wet objects (drinking glasses, potted plants, etc.) on top of the speakers-if allowed to soak in, even a small amount of water may permanently damage the speaker finish.
Related Downloads
Description
The newest addition to the Model Collection: the stunning KLH Model Three loudspeaker! This beauty is a compact bookshelf speaker that rivals the largest floor standing speakers. The Model Three’s two-way design continues the KLH acoustic suspension legacy of accurate, audiophile-quality performance. This charming bookshelf speaker serves as the perfect solution for music enthusiasts with smaller listening spaces. Unlike other loudspeakers at this price point, listeners have the flexibility to place their Model Three’s closer to the wall than the average tower speaker. Or with even more convenience, you can fit your Model Three on a bookshelf!
Features
- Iconic Mid-Century Modern Styling
- Acoustic Suspension Design – The most accurate and linear enclosure design available today
- Three-Position Acoustic Balance Control to tailor the loudspeaker’s output for the most difficult acoustic environments
- Non-Resonant Die-Cast Aluminum Woofer Frame
- Machined Aluminum 1” tweeter faceplate
- KLH cabinetry featuring a structurally reinforced 3⁄4” MDF Enclosure
- Thirteen Component network using high quality iron-core inductors & Mylar capacitors
- Each speaker includes its own 8 ̊ slant riser base made of powder coated 14-gauge steel
- Low-Profile Magnet Attached Grille
- 10-Year Warranty
Specifications
- Frequency Response: 46Hz – 20,000Hz +/- 3dB
- Low Frequency Extension: -10dB @ 35Hz
- In-Room Sensitivity: 88dB @2.83V / 1M
- Free-field Sensitivity: 85dB @ 2.83V / 1M
- Power Handling: 150 Watts / 600 Watts Peak
- Recommended Amplification: 30 Watts to 150 Watts
- In-Room Maximum SPL: 108dB
- Maximum Output @45Hz: 1 101dB
- Impedance: 6 Ohms (3.7 ohm minimum @320 Hz)
- Horizontal Dispersion: 140° Degrees
- Features: Three-Position Acoustic Balance Control
- Crossover Frequency: 1,600Hz
- High Frequency Driver: 1" Aluminum Dome with Soft Rubber Suspension
- Low Frequency Driver: 8" Pulp-Paper Cone with Reverse Roll Rubber Suspension, 1.5" Diameter Flat-Wire Voice Coil
- Enclosure Material: Structurally Reinforced ¾" Medium Density Fiberboard
- Inputs: Five-Way Gold-Plated Binding Posts
Dimensions
| Height: | 28.25" (71.8cm) w/ Included Riser Base 19.0" (48.2cm) w/o Riser Base |
| Width: | 12.25" (31.1cm) |
| Depth: | 11.5" (29.2cm) w/ Included Riser Base 10.5" (26.7cm) w/o Riser Base |
| Weight: | 29Ibs. (13.2kg) w/o Riser Base 36Ibs. (16.4kg) w/ Included Riser Base |
Included Accessories: 8° Slant Riser Base
Cleaning
Your speakers feature a genuine wood veneer. The finish is a low-gloss clear lacquer that only requires an occasional soft damp cloth. Clean with the grain, avoiding a circular or cross-grain motion. Do not use an abrasive cleaner. Avoid getting any part of the speaker components wet. Do not place wet objects (drinking glasses, potted plants, etc.) on top of the speakers-if allowed to soak in, even a small amount of water may permanently damage the speaker finish.
Related Downloads
Description
The newest addition to the Model Collection: the stunning KLH Model Three loudspeaker! This beauty is a compact bookshelf speaker that rivals the largest floor standing speakers. The Model Three’s two-way design continues the KLH acoustic suspension legacy of accurate, audiophile-quality performance. This charming bookshelf speaker serves as the perfect solution for music enthusiasts with smaller listening spaces. Unlike other loudspeakers at this price point, listeners have the flexibility to place their Model Three’s closer to the wall than the average tower speaker. Or with even more convenience, you can fit your Model Three on a bookshelf!
Features
- Iconic Mid-Century Modern Styling
- Acoustic Suspension Design – The most accurate and linear enclosure design available today
- Three-Position Acoustic Balance Control to tailor the loudspeaker’s output for the most difficult acoustic environments
- Non-Resonant Die-Cast Aluminum Woofer Frame
- Machined Aluminum 1” tweeter faceplate
- KLH cabinetry featuring a structurally reinforced 3⁄4” MDF Enclosure
- Thirteen Component network using high quality iron-core inductors & Mylar capacitors
- Each speaker includes its own 8 ̊ slant riser base made of powder coated 14-gauge steel
- Low-Profile Magnet Attached Grille
- 10-Year Warranty
Specifications
- Frequency Response: 46Hz – 20,000Hz +/- 3dB
- Low Frequency Extension: -10dB @ 35Hz
- In-Room Sensitivity: 88dB @2.83V / 1M
- Free-field Sensitivity: 85dB @ 2.83V / 1M
- Power Handling: 150 Watts / 600 Watts Peak
- Recommended Amplification: 30 Watts to 150 Watts
- In-Room Maximum SPL: 108dB
- Maximum Output @45Hz: 1 101dB
- Impedance: 6 Ohms (3.7 ohm minimum @320 Hz)
- Horizontal Dispersion: 140° Degrees
- Features: Three-Position Acoustic Balance Control
- Crossover Frequency: 1,600Hz
- High Frequency Driver: 1" Aluminum Dome with Soft Rubber Suspension
- Low Frequency Driver: 8" Pulp-Paper Cone with Reverse Roll Rubber Suspension, 1.5" Diameter Flat-Wire Voice Coil
- Enclosure Material: Structurally Reinforced ¾" Medium Density Fiberboard
- Inputs: Five-Way Gold-Plated Binding Posts
Dimensions
| Height: | 28.25" (71.8cm) w/ Included Riser Base 19.0" (48.2cm) w/o Riser Base |
| Width: | 12.25" (31.1cm) |
| Depth: | 11.5" (29.2cm) w/ Included Riser Base 10.5" (26.7cm) w/o Riser Base |
| Weight: | 29Ibs. (13.2kg) w/o Riser Base 36Ibs. (16.4kg) w/ Included Riser Base |
Included Accessories: 8° Slant Riser Base
Cleaning
Your speakers feature a genuine wood veneer. The finish is a low-gloss clear lacquer that only requires an occasional soft damp cloth. Clean with the grain, avoiding a circular or cross-grain motion. Do not use an abrasive cleaner. Avoid getting any part of the speaker components wet. Do not place wet objects (drinking glasses, potted plants, etc.) on top of the speakers-if allowed to soak in, even a small amount of water may permanently damage the speaker finish.
Related Downloads
Description
The newest addition to the Model Collection: the stunning KLH Model Three loudspeaker! This beauty is a compact bookshelf speaker that rivals the largest floor standing speakers. The Model Three’s two-way design continues the KLH acoustic suspension legacy of accurate, audiophile-quality performance. This charming bookshelf speaker serves as the perfect solution for music enthusiasts with smaller listening spaces. Unlike other loudspeakers at this price point, listeners have the flexibility to place their Model Three’s closer to the wall than the average tower speaker. Or with even more convenience, you can fit your Model Three on a bookshelf!
Features
- Iconic Mid-Century Modern Styling
- Acoustic Suspension Design – The most accurate and linear enclosure design available today
- Three-Position Acoustic Balance Control to tailor the loudspeaker’s output for the most difficult acoustic environments
- Non-Resonant Die-Cast Aluminum Woofer Frame
- Machined Aluminum 1” tweeter faceplate
- KLH cabinetry featuring a structurally reinforced 3⁄4” MDF Enclosure
- Thirteen Component network using high quality iron-core inductors & Mylar capacitors
- Each speaker includes its own 8 ̊ slant riser base made of powder coated 14-gauge steel
- Low-Profile Magnet Attached Grille
- 10-Year Warranty
Specifications
- Frequency Response: 46Hz – 20,000Hz +/- 3dB
- Low Frequency Extension: -10dB @ 35Hz
- In-Room Sensitivity: 88dB @2.83V / 1M
- Free-field Sensitivity: 85dB @ 2.83V / 1M
- Power Handling: 150 Watts / 600 Watts Peak
- Recommended Amplification: 30 Watts to 150 Watts
- In-Room Maximum SPL: 108dB
- Maximum Output @45Hz: 1 101dB
- Impedance: 6 Ohms (3.7 ohm minimum @320 Hz)
- Horizontal Dispersion: 140° Degrees
- Features: Three-Position Acoustic Balance Control
- Crossover Frequency: 1,600Hz
- High Frequency Driver: 1" Aluminum Dome with Soft Rubber Suspension
- Low Frequency Driver: 8" Pulp-Paper Cone with Reverse Roll Rubber Suspension, 1.5" Diameter Flat-Wire Voice Coil
- Enclosure Material: Structurally Reinforced ¾" Medium Density Fiberboard
- Inputs: Five-Way Gold-Plated Binding Posts
Dimensions
| Height: | 28.25" (71.8cm) w/ Included Riser Base 19.0" (48.2cm) w/o Riser Base |
| Width: | 12.25" (31.1cm) |
| Depth: | 11.5" (29.2cm) w/ Included Riser Base 10.5" (26.7cm) w/o Riser Base |
| Weight: | 29Ibs. (13.2kg) w/o Riser Base 36Ibs. (16.4kg) w/ Included Riser Base |
Included Accessories: 8° Slant Riser Base
Cleaning
Your speakers feature a genuine wood veneer. The finish is a low-gloss clear lacquer that only requires an occasional soft damp cloth. Clean with the grain, avoiding a circular or cross-grain motion. Do not use an abrasive cleaner. Avoid getting any part of the speaker components wet. Do not place wet objects (drinking glasses, potted plants, etc.) on top of the speakers-if allowed to soak in, even a small amount of water may permanently damage the speaker finish.
Related Downloads
Description
The newest addition to the Model Collection: the stunning KLH Model Three loudspeaker! This beauty is a compact bookshelf speaker that rivals the largest floor standing speakers. The Model Three’s two-way design continues the KLH acoustic suspension legacy of accurate, audiophile-quality performance. This charming bookshelf speaker serves as the perfect solution for music enthusiasts with smaller listening spaces. Unlike other loudspeakers at this price point, listeners have the flexibility to place their Model Three’s closer to the wall than the average tower speaker. Or with even more convenience, you can fit your Model Three on a bookshelf!
Features
- Iconic Mid-Century Modern Styling
- Acoustic Suspension Design – The most accurate and linear enclosure design available today
- Three-Position Acoustic Balance Control to tailor the loudspeaker’s output for the most difficult acoustic environments
- Non-Resonant Die-Cast Aluminum Woofer Frame
- Machined Aluminum 1” tweeter faceplate
- KLH cabinetry featuring a structurally reinforced 3⁄4” MDF Enclosure
- Thirteen Component network using high quality iron-core inductors & Mylar capacitors
- Each speaker includes its own 8 ̊ slant riser base made of powder coated 14-gauge steel
- Low-Profile Magnet Attached Grille
- 10-Year Warranty
Specifications
- Frequency Response: 46Hz – 20,000Hz +/- 3dB
- Low Frequency Extension: -10dB @ 35Hz
- In-Room Sensitivity: 88dB @2.83V / 1M
- Free-field Sensitivity: 85dB @ 2.83V / 1M
- Power Handling: 150 Watts / 600 Watts Peak
- Recommended Amplification: 30 Watts to 150 Watts
- In-Room Maximum SPL: 108dB
- Maximum Output @45Hz: 1 101dB
- Impedance: 6 Ohms (3.7 ohm minimum @320 Hz)
- Horizontal Dispersion: 140° Degrees
- Features: Three-Position Acoustic Balance Control
- Crossover Frequency: 1,600Hz
- High Frequency Driver: 1" Aluminum Dome with Soft Rubber Suspension
- Low Frequency Driver: 8" Pulp-Paper Cone with Reverse Roll Rubber Suspension, 1.5" Diameter Flat-Wire Voice Coil
- Enclosure Material: Structurally Reinforced ¾" Medium Density Fiberboard
- Inputs: Five-Way Gold-Plated Binding Posts
Dimensions
| Height: | 28.25" (71.8cm) w/ Included Riser Base 19.0" (48.2cm) w/o Riser Base |
| Width: | 12.25" (31.1cm) |
| Depth: | 11.5" (29.2cm) w/ Included Riser Base 10.5" (26.7cm) w/o Riser Base |
| Weight: | 29Ibs. (13.2kg) w/o Riser Base 36Ibs. (16.4kg) w/ Included Riser Base |
Included Accessories: 8° Slant Riser Base
Cleaning
Your speakers feature a genuine wood veneer. The finish is a low-gloss clear lacquer that only requires an occasional soft damp cloth. Clean with the grain, avoiding a circular or cross-grain motion. Do not use an abrasive cleaner. Avoid getting any part of the speaker components wet. Do not place wet objects (drinking glasses, potted plants, etc.) on top of the speakers-if allowed to soak in, even a small amount of water may permanently damage the speaker finish.
Related Downloads
