KLH AUDIO - Model Five 10" Acoustic Suspension Floorstanding Speaker (EACH) - English Walnut with Stonewash Linen Grille
KLH-F00071
Description
Features
KLH Audio was established in 1957 by Henry Kloss, Malcolm Low & Josef Hofmann. Henry Kloss first made his name as part of Acoustic Research with the introduction of the AR-1 and its patented acoustic suspension system that revolutionized the high-fidelity industry. Henry Kloss later left Acoustic Research to start KLH, and immediately began marketing his own acoustic suspension loudspeaker designs. The original KLH Model Five loudspeaker was first introduced in 1968 and was one of the best-selling speakers throughout the late 1960s and early ’70s.
KLH re-issued the famous Model Five during the spring of 2021. This new three-way loudspeaker features updated cosmetics, as well as all the major advancements in transducer design that have occurred over the last 50 years. But the original acoustic suspension philosophy, cabinet construction, and size all remain intact, thus maintaining the performance and appeal the loudspeaker enjoyed when it was first introduced.
Features:
- Iconic Mid-Century Modern Styling
- Acoustic Suspension Design - The most accurate and linear enclosure design available today
- Three-Position Acoustic Balance Control to tailor the loudspeaker's output for the most difficult acoustic environments
- Dedicated midrange driver to reproduce the critical mid-frequency band
- Non-Resonant Die-Cast Aluminum Midrange & Woofer Frames
- Machined Aluminum 1" tweeter faceplate
- KLH cabinetry featuring a structurally reinforced 3/4" MDF Enclosure
- Thirteen Component network using high-quality iron-core inductors & Mylar capacitors
- Each speaker includes its own 5º slant riser base made of powder-coated 14-gauge steel
- Low-Profile Magnet Attached Grille
- 10-Year Warranty
Acoustic Suspension
First introduced in 1954, the acoustic suspension principle has long been regarded as the most accurate of all the loudspeaker designs available. Edgar Villchur and Henry Kloss worked together to bring the original AR-1, and several later models, including the well-known AR-3, to market. Several brands, including KLH, would adopt the acoustic suspension principle and use it in their loudspeakers designs for many years to come. This design principle dominated the speaker market well into the 1970s.
In an acoustic suspension design, the volume of air inside the enclosure serves as a cushion of air, or air spring, to provide a restoring force for the woofer cone. The air inside the enclosure essentially becomes the dominant part of the woofer’s suspension. Since the volume of air inside the enclosure is more linear than the mechanical parts of the woofer’s suspension, this enables the woofer’s diaphragm to move in a more linear fashion. This enables the driver to operate at higher excursions with less distortion than more traditional bass-reflex type systems. Acoustic suspension systems are regarded all over the world for their greater accuracy, tighter bass transients, and exceptional bass resolution and texture.
Dedicated Midrange Driver
The KLH Model Five is a 3-way design featuring a dedicated midrange driver housed in its own internal enclosure. It’s the midrange driver’s responsibility to handle the most significant, middle part, of the audio spectrum. This portion of the audio band contains the vocal and musical instrument fundamentals which are most familiar to the human ear; and where accuracy, or inaccuracies, are most easily detected. In a three-way design, having a dedicated midrange means the driver can be optimized for this specific use since it doesn’t have the additional burden of reproducing lower & higher frequencies in the audio band. This results in truly remarkable clarity of vocals & instruments with less distortion.
Specifications
Specifications
- Frequency Response: 42Hz - 20,000Hz +/- 3dB
- Low Frequency Extension: -10dB @ 32Hz
- In-Room Sensitivity: 90.5dB @ 2.83V / 1M
- Free-field Sensitivity: 87.5dB @ 2.83V / 1M
- Power Handling: 200 Watts / 800 Watts Peak
- Recommended Amplification: 200 Watts to 200 Watts
- In-Room Maximum SPL: 112.3dB
- Impedance: 6 Ohms (3.5 ohm minimum @ 140 Hz)
- Horizontal Dispersion: 140°
- Features: Three-Position Acoustic Balance Control
- Crossover Frequency:
- MF: 380Hz (2nd Order Electro-Acoustic)
- HF: 2,850Hz (2nd Order Electro-Acoustic)
- High-Frequency Driver: 1" Aluminum Dome with Soft Rubber Suspension
- Mid-Frequency Driver: 4" Pulp-Paper Cone with Reverse Roll Rubber Suspension
- Low-Frequency Driver: 10" Pulp-Paper Cone with Reverse Roll Rubber Suspension, 2" Diameter Flat-Wire Voice Coil
- Enclosure Material: Structurally Reinforced 3/4" Medium Density Fiberboard
- Inputs: Five-Way Gold-Plated Binding Posts
- Dimensions (W x H x D)
- With Riser Base: 13.75" x 34.25" x 13" (34.925 x 86.995 x 33.02cm)
- Without Riser Base: 13.75" x 26" x 11.5" (34.925 x 66.04 x 29.21cm)
- Weight:
- With Riser Base: 44lbs (19.9581kg)
- Without Riser Base: 52lbs (23.5868kg)
- Included Accessories: 5º Slant Riser Base
Accessories
What's in the Box
- Model Five Floorstanding Speaker
- Matte Black Slant Riser Base
- Owner's Manual
Cleaning
Your speakers feature a genuine wood veneer. The finish is a low-gloss clear lacquer that only requires an occasional soft damp cloth. Clean with the grain, avoiding a circular or cross-grain motion. Do not use an abrasive cleaner. Avoid getting any part of the speaker components wet. Do not place wet objects (drinking glasses, potted plants, etc.) on top of the speakers-if allowed to soak in, even a small amount of water may permanently damage the loudspeaker finish.
Warranty
The KLH Model Five speakers are covered by 10 year warranty which begins from purchase date of the item (Receipt Date).
Warranty registration must be completed at KLHAUDIO.com/warranty.
Registration of the product must be completed within 120 days of purchase for warranty validation. Original receipt of purchase must be retained for proof of purchase. For warranty or service issues, please contact authorized KLH dealer. The warranty covers any production and/or material defects of the product. This warranty is non-transferable.
The following is NOT COVERED by the warranty:
1. Accidents, misuse, poor maintenance, electrical overloads such as lightning or voltage.
2. Incorrect use of product.
3. Altered serial number.
4. Transportation costs for service call.
5. Purchase of KLH products from unauthorized reseller.
Replacement item cannot exceed the cost of the item under warranty. The supplier is responsible for only repair or replacement.
Related Downloads
Description
Features
KLH Audio was established in 1957 by Henry Kloss, Malcolm Low & Josef Hofmann. Henry Kloss first made his name as part of Acoustic Research with the introduction of the AR-1 and its patented acoustic suspension system that revolutionized the high-fidelity industry. Henry Kloss later left Acoustic Research to start KLH, and immediately began marketing his own acoustic suspension loudspeaker designs. The original KLH Model Five loudspeaker was first introduced in 1968 and was one of the best-selling speakers throughout the late 1960s and early ’70s.
KLH re-issued the famous Model Five during the spring of 2021. This new three-way loudspeaker features updated cosmetics, as well as all the major advancements in transducer design that have occurred over the last 50 years. But the original acoustic suspension philosophy, cabinet construction, and size all remain intact, thus maintaining the performance and appeal the loudspeaker enjoyed when it was first introduced.
Features:
- Iconic Mid-Century Modern Styling
- Acoustic Suspension Design - The most accurate and linear enclosure design available today
- Three-Position Acoustic Balance Control to tailor the loudspeaker's output for the most difficult acoustic environments
- Dedicated midrange driver to reproduce the critical mid-frequency band
- Non-Resonant Die-Cast Aluminum Midrange & Woofer Frames
- Machined Aluminum 1" tweeter faceplate
- KLH cabinetry featuring a structurally reinforced 3/4" MDF Enclosure
- Thirteen Component network using high-quality iron-core inductors & Mylar capacitors
- Each speaker includes its own 5º slant riser base made of powder-coated 14-gauge steel
- Low-Profile Magnet Attached Grille
- 10-Year Warranty
Acoustic Suspension
First introduced in 1954, the acoustic suspension principle has long been regarded as the most accurate of all the loudspeaker designs available. Edgar Villchur and Henry Kloss worked together to bring the original AR-1, and several later models, including the well-known AR-3, to market. Several brands, including KLH, would adopt the acoustic suspension principle and use it in their loudspeakers designs for many years to come. This design principle dominated the speaker market well into the 1970s.
In an acoustic suspension design, the volume of air inside the enclosure serves as a cushion of air, or air spring, to provide a restoring force for the woofer cone. The air inside the enclosure essentially becomes the dominant part of the woofer’s suspension. Since the volume of air inside the enclosure is more linear than the mechanical parts of the woofer’s suspension, this enables the woofer’s diaphragm to move in a more linear fashion. This enables the driver to operate at higher excursions with less distortion than more traditional bass-reflex type systems. Acoustic suspension systems are regarded all over the world for their greater accuracy, tighter bass transients, and exceptional bass resolution and texture.
Dedicated Midrange Driver
The KLH Model Five is a 3-way design featuring a dedicated midrange driver housed in its own internal enclosure. It’s the midrange driver’s responsibility to handle the most significant, middle part, of the audio spectrum. This portion of the audio band contains the vocal and musical instrument fundamentals which are most familiar to the human ear; and where accuracy, or inaccuracies, are most easily detected. In a three-way design, having a dedicated midrange means the driver can be optimized for this specific use since it doesn’t have the additional burden of reproducing lower & higher frequencies in the audio band. This results in truly remarkable clarity of vocals & instruments with less distortion.
Specifications
Specifications
- Frequency Response: 42Hz - 20,000Hz +/- 3dB
- Low Frequency Extension: -10dB @ 32Hz
- In-Room Sensitivity: 90.5dB @ 2.83V / 1M
- Free-field Sensitivity: 87.5dB @ 2.83V / 1M
- Power Handling: 200 Watts / 800 Watts Peak
- Recommended Amplification: 200 Watts to 200 Watts
- In-Room Maximum SPL: 112.3dB
- Impedance: 6 Ohms (3.5 ohm minimum @ 140 Hz)
- Horizontal Dispersion: 140°
- Features: Three-Position Acoustic Balance Control
- Crossover Frequency:
- MF: 380Hz (2nd Order Electro-Acoustic)
- HF: 2,850Hz (2nd Order Electro-Acoustic)
- High-Frequency Driver: 1" Aluminum Dome with Soft Rubber Suspension
- Mid-Frequency Driver: 4" Pulp-Paper Cone with Reverse Roll Rubber Suspension
- Low-Frequency Driver: 10" Pulp-Paper Cone with Reverse Roll Rubber Suspension, 2" Diameter Flat-Wire Voice Coil
- Enclosure Material: Structurally Reinforced 3/4" Medium Density Fiberboard
- Inputs: Five-Way Gold-Plated Binding Posts
- Dimensions (W x H x D)
- With Riser Base: 13.75" x 34.25" x 13" (34.925 x 86.995 x 33.02cm)
- Without Riser Base: 13.75" x 26" x 11.5" (34.925 x 66.04 x 29.21cm)
- Weight:
- With Riser Base: 44lbs (19.9581kg)
- Without Riser Base: 52lbs (23.5868kg)
- Included Accessories: 5º Slant Riser Base
Accessories
What's in the Box
- Model Five Floorstanding Speaker
- Matte Black Slant Riser Base
- Owner's Manual
Cleaning
Your speakers feature a genuine wood veneer. The finish is a low-gloss clear lacquer that only requires an occasional soft damp cloth. Clean with the grain, avoiding a circular or cross-grain motion. Do not use an abrasive cleaner. Avoid getting any part of the speaker components wet. Do not place wet objects (drinking glasses, potted plants, etc.) on top of the speakers-if allowed to soak in, even a small amount of water may permanently damage the loudspeaker finish.
Warranty
The KLH Model Five speakers are covered by 10 year warranty which begins from purchase date of the item (Receipt Date).
Warranty registration must be completed at KLHAUDIO.com/warranty.
Registration of the product must be completed within 120 days of purchase for warranty validation. Original receipt of purchase must be retained for proof of purchase. For warranty or service issues, please contact authorized KLH dealer. The warranty covers any production and/or material defects of the product. This warranty is non-transferable.
The following is NOT COVERED by the warranty:
1. Accidents, misuse, poor maintenance, electrical overloads such as lightning or voltage.
2. Incorrect use of product.
3. Altered serial number.
4. Transportation costs for service call.
5. Purchase of KLH products from unauthorized reseller.
Replacement item cannot exceed the cost of the item under warranty. The supplier is responsible for only repair or replacement.
Related Downloads
Description
Features
KLH Audio was established in 1957 by Henry Kloss, Malcolm Low & Josef Hofmann. Henry Kloss first made his name as part of Acoustic Research with the introduction of the AR-1 and its patented acoustic suspension system that revolutionized the high-fidelity industry. Henry Kloss later left Acoustic Research to start KLH, and immediately began marketing his own acoustic suspension loudspeaker designs. The original KLH Model Five loudspeaker was first introduced in 1968 and was one of the best-selling speakers throughout the late 1960s and early ’70s.
KLH re-issued the famous Model Five during the spring of 2021. This new three-way loudspeaker features updated cosmetics, as well as all the major advancements in transducer design that have occurred over the last 50 years. But the original acoustic suspension philosophy, cabinet construction, and size all remain intact, thus maintaining the performance and appeal the loudspeaker enjoyed when it was first introduced.
Features:
- Iconic Mid-Century Modern Styling
- Acoustic Suspension Design - The most accurate and linear enclosure design available today
- Three-Position Acoustic Balance Control to tailor the loudspeaker's output for the most difficult acoustic environments
- Dedicated midrange driver to reproduce the critical mid-frequency band
- Non-Resonant Die-Cast Aluminum Midrange & Woofer Frames
- Machined Aluminum 1" tweeter faceplate
- KLH cabinetry featuring a structurally reinforced 3/4" MDF Enclosure
- Thirteen Component network using high-quality iron-core inductors & Mylar capacitors
- Each speaker includes its own 5º slant riser base made of powder-coated 14-gauge steel
- Low-Profile Magnet Attached Grille
- 10-Year Warranty
Acoustic Suspension
First introduced in 1954, the acoustic suspension principle has long been regarded as the most accurate of all the loudspeaker designs available. Edgar Villchur and Henry Kloss worked together to bring the original AR-1, and several later models, including the well-known AR-3, to market. Several brands, including KLH, would adopt the acoustic suspension principle and use it in their loudspeakers designs for many years to come. This design principle dominated the speaker market well into the 1970s.
In an acoustic suspension design, the volume of air inside the enclosure serves as a cushion of air, or air spring, to provide a restoring force for the woofer cone. The air inside the enclosure essentially becomes the dominant part of the woofer’s suspension. Since the volume of air inside the enclosure is more linear than the mechanical parts of the woofer’s suspension, this enables the woofer’s diaphragm to move in a more linear fashion. This enables the driver to operate at higher excursions with less distortion than more traditional bass-reflex type systems. Acoustic suspension systems are regarded all over the world for their greater accuracy, tighter bass transients, and exceptional bass resolution and texture.
Dedicated Midrange Driver
The KLH Model Five is a 3-way design featuring a dedicated midrange driver housed in its own internal enclosure. It’s the midrange driver’s responsibility to handle the most significant, middle part, of the audio spectrum. This portion of the audio band contains the vocal and musical instrument fundamentals which are most familiar to the human ear; and where accuracy, or inaccuracies, are most easily detected. In a three-way design, having a dedicated midrange means the driver can be optimized for this specific use since it doesn’t have the additional burden of reproducing lower & higher frequencies in the audio band. This results in truly remarkable clarity of vocals & instruments with less distortion.
Specifications
Specifications
- Frequency Response: 42Hz - 20,000Hz +/- 3dB
- Low Frequency Extension: -10dB @ 32Hz
- In-Room Sensitivity: 90.5dB @ 2.83V / 1M
- Free-field Sensitivity: 87.5dB @ 2.83V / 1M
- Power Handling: 200 Watts / 800 Watts Peak
- Recommended Amplification: 200 Watts to 200 Watts
- In-Room Maximum SPL: 112.3dB
- Impedance: 6 Ohms (3.5 ohm minimum @ 140 Hz)
- Horizontal Dispersion: 140°
- Features: Three-Position Acoustic Balance Control
- Crossover Frequency:
- MF: 380Hz (2nd Order Electro-Acoustic)
- HF: 2,850Hz (2nd Order Electro-Acoustic)
- High-Frequency Driver: 1" Aluminum Dome with Soft Rubber Suspension
- Mid-Frequency Driver: 4" Pulp-Paper Cone with Reverse Roll Rubber Suspension
- Low-Frequency Driver: 10" Pulp-Paper Cone with Reverse Roll Rubber Suspension, 2" Diameter Flat-Wire Voice Coil
- Enclosure Material: Structurally Reinforced 3/4" Medium Density Fiberboard
- Inputs: Five-Way Gold-Plated Binding Posts
- Dimensions (W x H x D)
- With Riser Base: 13.75" x 34.25" x 13" (34.925 x 86.995 x 33.02cm)
- Without Riser Base: 13.75" x 26" x 11.5" (34.925 x 66.04 x 29.21cm)
- Weight:
- With Riser Base: 44lbs (19.9581kg)
- Without Riser Base: 52lbs (23.5868kg)
- Included Accessories: 5º Slant Riser Base
Accessories
What's in the Box
- Model Five Floorstanding Speaker
- Matte Black Slant Riser Base
- Owner's Manual
Cleaning
Your speakers feature a genuine wood veneer. The finish is a low-gloss clear lacquer that only requires an occasional soft damp cloth. Clean with the grain, avoiding a circular or cross-grain motion. Do not use an abrasive cleaner. Avoid getting any part of the speaker components wet. Do not place wet objects (drinking glasses, potted plants, etc.) on top of the speakers-if allowed to soak in, even a small amount of water may permanently damage the loudspeaker finish.
Warranty
The KLH Model Five speakers are covered by 10 year warranty which begins from purchase date of the item (Receipt Date).
Warranty registration must be completed at KLHAUDIO.com/warranty.
Registration of the product must be completed within 120 days of purchase for warranty validation. Original receipt of purchase must be retained for proof of purchase. For warranty or service issues, please contact authorized KLH dealer. The warranty covers any production and/or material defects of the product. This warranty is non-transferable.
The following is NOT COVERED by the warranty:
1. Accidents, misuse, poor maintenance, electrical overloads such as lightning or voltage.
2. Incorrect use of product.
3. Altered serial number.
4. Transportation costs for service call.
5. Purchase of KLH products from unauthorized reseller.
Replacement item cannot exceed the cost of the item under warranty. The supplier is responsible for only repair or replacement.
Related Downloads
Description
Features
KLH Audio was established in 1957 by Henry Kloss, Malcolm Low & Josef Hofmann. Henry Kloss first made his name as part of Acoustic Research with the introduction of the AR-1 and its patented acoustic suspension system that revolutionized the high-fidelity industry. Henry Kloss later left Acoustic Research to start KLH, and immediately began marketing his own acoustic suspension loudspeaker designs. The original KLH Model Five loudspeaker was first introduced in 1968 and was one of the best-selling speakers throughout the late 1960s and early ’70s.
KLH re-issued the famous Model Five during the spring of 2021. This new three-way loudspeaker features updated cosmetics, as well as all the major advancements in transducer design that have occurred over the last 50 years. But the original acoustic suspension philosophy, cabinet construction, and size all remain intact, thus maintaining the performance and appeal the loudspeaker enjoyed when it was first introduced.
Features:
- Iconic Mid-Century Modern Styling
- Acoustic Suspension Design - The most accurate and linear enclosure design available today
- Three-Position Acoustic Balance Control to tailor the loudspeaker's output for the most difficult acoustic environments
- Dedicated midrange driver to reproduce the critical mid-frequency band
- Non-Resonant Die-Cast Aluminum Midrange & Woofer Frames
- Machined Aluminum 1" tweeter faceplate
- KLH cabinetry featuring a structurally reinforced 3/4" MDF Enclosure
- Thirteen Component network using high-quality iron-core inductors & Mylar capacitors
- Each speaker includes its own 5º slant riser base made of powder-coated 14-gauge steel
- Low-Profile Magnet Attached Grille
- 10-Year Warranty
Acoustic Suspension
First introduced in 1954, the acoustic suspension principle has long been regarded as the most accurate of all the loudspeaker designs available. Edgar Villchur and Henry Kloss worked together to bring the original AR-1, and several later models, including the well-known AR-3, to market. Several brands, including KLH, would adopt the acoustic suspension principle and use it in their loudspeakers designs for many years to come. This design principle dominated the speaker market well into the 1970s.
In an acoustic suspension design, the volume of air inside the enclosure serves as a cushion of air, or air spring, to provide a restoring force for the woofer cone. The air inside the enclosure essentially becomes the dominant part of the woofer’s suspension. Since the volume of air inside the enclosure is more linear than the mechanical parts of the woofer’s suspension, this enables the woofer’s diaphragm to move in a more linear fashion. This enables the driver to operate at higher excursions with less distortion than more traditional bass-reflex type systems. Acoustic suspension systems are regarded all over the world for their greater accuracy, tighter bass transients, and exceptional bass resolution and texture.
Dedicated Midrange Driver
The KLH Model Five is a 3-way design featuring a dedicated midrange driver housed in its own internal enclosure. It’s the midrange driver’s responsibility to handle the most significant, middle part, of the audio spectrum. This portion of the audio band contains the vocal and musical instrument fundamentals which are most familiar to the human ear; and where accuracy, or inaccuracies, are most easily detected. In a three-way design, having a dedicated midrange means the driver can be optimized for this specific use since it doesn’t have the additional burden of reproducing lower & higher frequencies in the audio band. This results in truly remarkable clarity of vocals & instruments with less distortion.
Specifications
Specifications
- Frequency Response: 42Hz - 20,000Hz +/- 3dB
- Low Frequency Extension: -10dB @ 32Hz
- In-Room Sensitivity: 90.5dB @ 2.83V / 1M
- Free-field Sensitivity: 87.5dB @ 2.83V / 1M
- Power Handling: 200 Watts / 800 Watts Peak
- Recommended Amplification: 200 Watts to 200 Watts
- In-Room Maximum SPL: 112.3dB
- Impedance: 6 Ohms (3.5 ohm minimum @ 140 Hz)
- Horizontal Dispersion: 140°
- Features: Three-Position Acoustic Balance Control
- Crossover Frequency:
- MF: 380Hz (2nd Order Electro-Acoustic)
- HF: 2,850Hz (2nd Order Electro-Acoustic)
- High-Frequency Driver: 1" Aluminum Dome with Soft Rubber Suspension
- Mid-Frequency Driver: 4" Pulp-Paper Cone with Reverse Roll Rubber Suspension
- Low-Frequency Driver: 10" Pulp-Paper Cone with Reverse Roll Rubber Suspension, 2" Diameter Flat-Wire Voice Coil
- Enclosure Material: Structurally Reinforced 3/4" Medium Density Fiberboard
- Inputs: Five-Way Gold-Plated Binding Posts
- Dimensions (W x H x D)
- With Riser Base: 13.75" x 34.25" x 13" (34.925 x 86.995 x 33.02cm)
- Without Riser Base: 13.75" x 26" x 11.5" (34.925 x 66.04 x 29.21cm)
- Weight:
- With Riser Base: 44lbs (19.9581kg)
- Without Riser Base: 52lbs (23.5868kg)
- Included Accessories: 5º Slant Riser Base
Accessories
What's in the Box
- Model Five Floorstanding Speaker
- Matte Black Slant Riser Base
- Owner's Manual
Cleaning
Your speakers feature a genuine wood veneer. The finish is a low-gloss clear lacquer that only requires an occasional soft damp cloth. Clean with the grain, avoiding a circular or cross-grain motion. Do not use an abrasive cleaner. Avoid getting any part of the speaker components wet. Do not place wet objects (drinking glasses, potted plants, etc.) on top of the speakers-if allowed to soak in, even a small amount of water may permanently damage the loudspeaker finish.
Warranty
The KLH Model Five speakers are covered by 10 year warranty which begins from purchase date of the item (Receipt Date).
Warranty registration must be completed at KLHAUDIO.com/warranty.
Registration of the product must be completed within 120 days of purchase for warranty validation. Original receipt of purchase must be retained for proof of purchase. For warranty or service issues, please contact authorized KLH dealer. The warranty covers any production and/or material defects of the product. This warranty is non-transferable.
The following is NOT COVERED by the warranty:
1. Accidents, misuse, poor maintenance, electrical overloads such as lightning or voltage.
2. Incorrect use of product.
3. Altered serial number.
4. Transportation costs for service call.
5. Purchase of KLH products from unauthorized reseller.
Replacement item cannot exceed the cost of the item under warranty. The supplier is responsible for only repair or replacement.
Related Downloads
Description
Features
KLH Audio was established in 1957 by Henry Kloss, Malcolm Low & Josef Hofmann. Henry Kloss first made his name as part of Acoustic Research with the introduction of the AR-1 and its patented acoustic suspension system that revolutionized the high-fidelity industry. Henry Kloss later left Acoustic Research to start KLH, and immediately began marketing his own acoustic suspension loudspeaker designs. The original KLH Model Five loudspeaker was first introduced in 1968 and was one of the best-selling speakers throughout the late 1960s and early ’70s.
KLH re-issued the famous Model Five during the spring of 2021. This new three-way loudspeaker features updated cosmetics, as well as all the major advancements in transducer design that have occurred over the last 50 years. But the original acoustic suspension philosophy, cabinet construction, and size all remain intact, thus maintaining the performance and appeal the loudspeaker enjoyed when it was first introduced.
Features:
- Iconic Mid-Century Modern Styling
- Acoustic Suspension Design - The most accurate and linear enclosure design available today
- Three-Position Acoustic Balance Control to tailor the loudspeaker's output for the most difficult acoustic environments
- Dedicated midrange driver to reproduce the critical mid-frequency band
- Non-Resonant Die-Cast Aluminum Midrange & Woofer Frames
- Machined Aluminum 1" tweeter faceplate
- KLH cabinetry featuring a structurally reinforced 3/4" MDF Enclosure
- Thirteen Component network using high-quality iron-core inductors & Mylar capacitors
- Each speaker includes its own 5º slant riser base made of powder-coated 14-gauge steel
- Low-Profile Magnet Attached Grille
- 10-Year Warranty
Acoustic Suspension
First introduced in 1954, the acoustic suspension principle has long been regarded as the most accurate of all the loudspeaker designs available. Edgar Villchur and Henry Kloss worked together to bring the original AR-1, and several later models, including the well-known AR-3, to market. Several brands, including KLH, would adopt the acoustic suspension principle and use it in their loudspeakers designs for many years to come. This design principle dominated the speaker market well into the 1970s.
In an acoustic suspension design, the volume of air inside the enclosure serves as a cushion of air, or air spring, to provide a restoring force for the woofer cone. The air inside the enclosure essentially becomes the dominant part of the woofer’s suspension. Since the volume of air inside the enclosure is more linear than the mechanical parts of the woofer’s suspension, this enables the woofer’s diaphragm to move in a more linear fashion. This enables the driver to operate at higher excursions with less distortion than more traditional bass-reflex type systems. Acoustic suspension systems are regarded all over the world for their greater accuracy, tighter bass transients, and exceptional bass resolution and texture.
Dedicated Midrange Driver
The KLH Model Five is a 3-way design featuring a dedicated midrange driver housed in its own internal enclosure. It’s the midrange driver’s responsibility to handle the most significant, middle part, of the audio spectrum. This portion of the audio band contains the vocal and musical instrument fundamentals which are most familiar to the human ear; and where accuracy, or inaccuracies, are most easily detected. In a three-way design, having a dedicated midrange means the driver can be optimized for this specific use since it doesn’t have the additional burden of reproducing lower & higher frequencies in the audio band. This results in truly remarkable clarity of vocals & instruments with less distortion.
Specifications
Specifications
- Frequency Response: 42Hz - 20,000Hz +/- 3dB
- Low Frequency Extension: -10dB @ 32Hz
- In-Room Sensitivity: 90.5dB @ 2.83V / 1M
- Free-field Sensitivity: 87.5dB @ 2.83V / 1M
- Power Handling: 200 Watts / 800 Watts Peak
- Recommended Amplification: 200 Watts to 200 Watts
- In-Room Maximum SPL: 112.3dB
- Impedance: 6 Ohms (3.5 ohm minimum @ 140 Hz)
- Horizontal Dispersion: 140°
- Features: Three-Position Acoustic Balance Control
- Crossover Frequency:
- MF: 380Hz (2nd Order Electro-Acoustic)
- HF: 2,850Hz (2nd Order Electro-Acoustic)
- High-Frequency Driver: 1" Aluminum Dome with Soft Rubber Suspension
- Mid-Frequency Driver: 4" Pulp-Paper Cone with Reverse Roll Rubber Suspension
- Low-Frequency Driver: 10" Pulp-Paper Cone with Reverse Roll Rubber Suspension, 2" Diameter Flat-Wire Voice Coil
- Enclosure Material: Structurally Reinforced 3/4" Medium Density Fiberboard
- Inputs: Five-Way Gold-Plated Binding Posts
- Dimensions (W x H x D)
- With Riser Base: 13.75" x 34.25" x 13" (34.925 x 86.995 x 33.02cm)
- Without Riser Base: 13.75" x 26" x 11.5" (34.925 x 66.04 x 29.21cm)
- Weight:
- With Riser Base: 44lbs (19.9581kg)
- Without Riser Base: 52lbs (23.5868kg)
- Included Accessories: 5º Slant Riser Base
Accessories
What's in the Box
- Model Five Floorstanding Speaker
- Matte Black Slant Riser Base
- Owner's Manual
Cleaning
Your speakers feature a genuine wood veneer. The finish is a low-gloss clear lacquer that only requires an occasional soft damp cloth. Clean with the grain, avoiding a circular or cross-grain motion. Do not use an abrasive cleaner. Avoid getting any part of the speaker components wet. Do not place wet objects (drinking glasses, potted plants, etc.) on top of the speakers-if allowed to soak in, even a small amount of water may permanently damage the loudspeaker finish.
Warranty
The KLH Model Five speakers are covered by 10 year warranty which begins from purchase date of the item (Receipt Date).
Warranty registration must be completed at KLHAUDIO.com/warranty.
Registration of the product must be completed within 120 days of purchase for warranty validation. Original receipt of purchase must be retained for proof of purchase. For warranty or service issues, please contact authorized KLH dealer. The warranty covers any production and/or material defects of the product. This warranty is non-transferable.
The following is NOT COVERED by the warranty:
1. Accidents, misuse, poor maintenance, electrical overloads such as lightning or voltage.
2. Incorrect use of product.
3. Altered serial number.
4. Transportation costs for service call.
5. Purchase of KLH products from unauthorized reseller.
Replacement item cannot exceed the cost of the item under warranty. The supplier is responsible for only repair or replacement.
Related Downloads
